◊ Replacement of all air filters in H.V.A.C equipment
◊ Complete cleaning of evaporator and condenser coils
◊ Blower housing secure, tighten if required
◊ Check proper rotation and condition of fan blades
◊ Greasing of all bearing and motors
◊ Inspect Thermostats, Timers, Relays and Contactors
◊ Replacement of any worn belts
◊ Inspect heat exchangers
◊ Tightening of all electrical connections
◊ Complete leak test
◊ Check ignition systems

◊ Inspect and calibrate temperature controls
◊ Set coolers at 35 degrees
◊ Condenser fan operating properly
◊ Clean condenser and evaporator
◊ Inspect all door gaskets and sweeps
◊ Lubricate all hinges and check safety latches
◊ Inspect and calibrate temperature controls
◊ Set freezer at 0 degrees
◊ Check drain heat tape
◊ Clean condensate pan and drain
◊ Check for refrigerant leaks

◊ Clean condenser coil and filter
◊ Clean pump
◊ Clean and sanitize ice plate with nickel safe cleaner
◊ Check time production cycle
◊ Clean water troughs
◊ Clean distribution tubes
◊ Check water filter for proper operation
◊ Adjust thickness control as required

◊ Complete cleaning of evaporator and condenser coils
◊ Cleaning of all condensate drains
◊ Tightening of all electrical connections
◊ Inspection of complete exhaust system
◊ Inspect & calibrate all temperature settings on refrigeration
◊ Complete leak test for oils or refrigerant
◊ Inspection of all refrigeration gaskets
◊ Inspection of Make-up air system